{"title":"Xenon Light Sources","description":"\u003ch2\u003eXenon Light Sources for Endoscopy\u003c\/h2\u003e\n\u003cp\u003eExplore xenon light sources for endoscopic imaging systems, with models from Stryker, CONMED Linvatec and Smith \u0026amp; Nephew DYONICS. These consoles deliver illumination through a compatible fiber optic light cable to a rigid or flexible endoscope. The collection includes Stryker X6000, X7000 and X8000 units, the CONMED LS7700 and the DYONICS 300XL.\u003c\/p\u003e\n\n\u003ch3\u003eChoose a light source for your equipment\u003c\/h3\u003e\n\u003cp\u003eSeveral models in this collection use a 300 W xenon lamp, but their controls, cable connections and system functions differ. For example, the Stryker X8000 displays lamp hours and light intensity on its front panel, while the CONMED LS7700 offers a universal light-guide receptacle and camera-linked light control when used with compatible CONMED equipment.\u003c\/p\u003e\n\n\u003cp\u003eCompare the model and part number with your camera system, light cable and scope. For a pre-owned unit, also review the stated lamp hours, included power cord or accessories, and the condition described on its individual product page. Listings with different lamp-hour counts may represent separate units of the same model.\u003c\/p\u003e\n\n\u003cp\u003eNeed only a replacement lamp? Browse the \u003cstrong\u003eXenon Light Bulbs\u003c\/strong\u003e subcategory for lamp modules rather than complete light-source consoles.\u003c\/p\u003e","products":[{"product_id":"stryker-x7000-endoscope-light-source-pn-220-190-000-new-xenon-light-bulb","title":"STRYKER X7000 ENDOSCOPE LIGHT SOURCE, PN 220-190-000 - NEW XENON LIGHT BULB","description":"\u003cp\u003eThe Stryker X7000 Endoscope Light Source (P\/N 220-190-000) provides illumination for endoscopic procedures using a 300 W elliptical xenon bulb. It is designed for use with Stryker endoscopy camera systems, including the 1088 platform.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb:\u003c\/strong\u003e New bulb included, as stated by the seller; rated life is approximately 500 hours when used properly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTesting:\u003c\/strong\u003e Tested at the seller’s facility for several hours; functions verified by a qualified biomedical technician\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e Adjustable light output, internal safety checks, thermal protection, warning\/error codes, Ethernet interface and SIDNE compatibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e With a compatible ESST light cable, the unit can enter Standby when the scope is disconnected\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe seller reports compatibility with Stryker 1088, 1188 and 1288 systems. Confirm compatibility with your system and cable configuration before purchase.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Stryker","offers":[{"title":"Default Title","offer_id":47905943421089,"sku":"X7000","price":895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/6619\/4593\/files\/stryker-x7000-endoscope-light-source-pn-220-190-000-new-xe.jpg?v=1790533297"},{"product_id":"stryker-x8000-endoscope-light-source-220-200-000-new-xenon-light-bulb","title":"STRYKER X8000 ENDOSCOPE LIGHT SOURCE, 220-200-000 - NEW XENON LIGHT BULB","description":"\u003cp\u003eThe Stryker X8000 Xenon Endoscope Light Source (P\/N 220-200-000) provides illumination for endoscopic procedures through a fiberoptic light cable. It uses a 300 W elliptical xenon bulb and includes a bulb described by the seller as new and low-hours.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTesting:\u003c\/strong\u003e Tested at the seller’s facility for several days; functions verified by a qualified biomedical technician\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulb life:\u003c\/strong\u003e Approximately 500 hours when used properly, according to the manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e Shows brightness, bulb hours and warning\/error codes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e With a compatible ESST cable, the unit can enter Standby when the scope is disconnected\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe seller reports compatibility with Stryker 1088, 1188 and 1288 camera systems and the L9000 model. Please confirm compatibility with your system and cable configuration before purchase.\u003c\/p\u003e","brand":"Stryker","offers":[{"title":"Default Title","offer_id":47905943453857,"sku":"X8000","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/6619\/4593\/files\/stryker-x8000-endoscope-light-source-220-200-000-new-xenon.jpg?v=1790533297"},{"product_id":"stryker-x6000-endoscope-light-source-220-185-000-new-300w-xenon-light-bulb","title":"STRYKER X6000 ENDOSCOPE LIGHT SOURCE, 220-185-000 - NEW 300W XENON LIGHT BULB","description":"\u003cp\u003eThe Stryker X6000 Xenon Endoscope Light Source (P\/N 220-185-000) provides illumination for endoscopic procedures and is designed for use with Stryker medical video cameras. It uses a 300 W Xenon Cermax lamp. A new xenon bulb is included, as stated by the seller.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e Good working condition\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTesting:\u003c\/strong\u003e Tested at the seller’s facility; functions verified by a qualified biomedical technician\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e Electronic Scope Sensing Technology (ESST) can place the unit in standby when a compatible ESST cable detects that the scope has been disconnected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLamp life:\u003c\/strong\u003e Approximately 500 hours with proper use, according to the manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatibility with Stryker 888, 988, 1088, 1188 and 1288 camera systems. Confirm system and cable compatibility before purchase.\u003c\/p\u003e","brand":"Stryker","offers":[{"title":"Default Title","offer_id":47905943486625,"sku":"X6000","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/6619\/4593\/files\/stryker-x6000-endoscope-light-source-220-185-000-new-300w.jpg?v=1790533297"},{"product_id":"stryker-x7000-endoscope-light-source-pn-220-190-000-50-hours-xenon-light-bulb","title":"STRYKER X7000 ENDOSCOPE LIGHT SOURCE, PN 220-190-000 - 70 HOURS XENON LIGHT BULB","description":"\u003cp\u003eThe Stryker X7000 Xenon Endoscope Light Source, P\/N 220-190-000, provides illumination through a fiber-optic light cable for endoscopic applications. It uses a 300 W Xenon lamp. The bulb-hour meter is reported to show approximately 70 hours; the X7000 manual recommends replacing the lamp at 500 hours or if illumination becomes insufficient.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Stryker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e X7000 Xenon Light Source\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 220-190-000\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLamp:\u003c\/strong\u003e 300 W Xenon\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBulb-hour reading:\u003c\/strong\u003e Approximately 70 hours, as reported by the seller\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTesting:\u003c\/strong\u003e Tested for several hours at the seller’s facility; functions verified by a qualified biomedical technician\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe seller reports compatibility with Stryker 1088, 1188, and 1288 systems. The unit uses Stryker light cables and may be connected to compatible rigid or flexible endoscopes with the appropriate cable and adapters. Confirm system and lamp-module compatibility before purchase; this listing does not claim that X7000 and X8000 lamp modules are interchangeable.\u003c\/p\u003e","brand":"Stryker","offers":[{"title":"Default Title","offer_id":47905945190561,"sku":"X7000","price":625.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/6619\/4593\/files\/stryker-x7000-endoscope-light-source-pn-220-190-000-70-hou.jpg?v=1790533347"},{"product_id":"dyonics-300xl-light-source-7206084-300w-xenon-light-bulb","title":"DYONICS 300XL LIGHT SOURCE, 7206084 - 300W XENON LIGHT BULB","description":"\u003cp\u003eSmith \u0026amp; Nephew DYONICS 300XL Xenon Light Source, REF 7206084. This 300 W endoscope light source provides 5700–6000 K illumination and is designed for endoscopic procedures. It accepts light guide fittings for Dyonics\/Wolf, Olympus, ACMI, and Storz systems. Tested in our facility for several hours, with all functions verified by a qualified biomedical technician.\u003c\/p\u003e","brand":"Smith \u0026 Nephew - Dyonics","offers":[{"title":"Default Title","offer_id":47905946173601,"sku":"300XL-7206084","price":245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/6619\/4593\/files\/dyonics-300xl-light-source-7206084-300w-xenon-light-bulb.jpg?v=1790533379"},{"product_id":"stryker-x8000-endoscope-light-source-220-200-000-under-100hours-xenon-light-bulb","title":"STRYKER X8000 ENDOSCOPE LIGHT SOURCE, 220-200-000 - UNDER 100HOURS XENON LIGHT BULB","description":"\u003cp\u003eThe Stryker X8000 (P\/N 220-200-000) is a xenon light source for endoscopic procedures. It uses a 300 W elliptical xenon lamp and delivers illumination through a compatible fiberoptic light cable. The recently replaced lamp has less than 100 hours of use, according to the displayed hour reading; the lamp is rated for approximately 500 hours.\u003c\/p\u003e\n\n\u003cp\u003eThe X8000 includes an LCD display for bulb-hour readings and warning or error codes, and a safety shutoff that activates if the bulb assembly overheats. When used with an ESST light cable, it can enter standby if the scope disconnects from the cable. The light source was tested at our facility for several days, and all functions were verified by a qualified biomedical technician.\u003c\/p\u003e\n\n\u003cp\u003eSuitable for endoscopy setups using compatible Stryker 1088, 1188, or 1288 camera systems.\u003c\/p\u003e","brand":"Stryker","offers":[{"title":"Default Title","offer_id":47905946435745,"sku":"X8000","price":745.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/6619\/4593\/files\/stryker-x8000-endoscope-light-source-220-200-000-under-100.jpg?v=1790533379"},{"product_id":"conmed-linvatec-ls7700-light-source","title":"ConMed Linvatec LS7700 Light Source","description":"\u003cp\u003eThe ConMed Linvatec LS7700 is a 300 W xenon light source for endoscopic applications. It delivers light through a compatible fiberoptic guide and uses an optical system designed to improve numerical aperture and distribute light. The universal light-guide receptacle accommodates compatible guide fittings and adapters.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures and specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eLamp: 300 W xenon short-arc\u003c\/li\u003e\n  \u003cli\u003eLamp life: 500 hours, with an on-screen hours-remaining indicator\u003c\/li\u003e\n  \u003cli\u003eStandby button for placing the light source in standby mode\u003c\/li\u003e\n  \u003cli\u003eManual or automatic intensity control\u003c\/li\u003e\n  \u003cli\u003eUniversal light-guide receptacle for compatible fittings and adapters\u003c\/li\u003e\n  \u003cli\u003eTypical light output: 1,300–1,800 lumens\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ConMed Linvatec","offers":[{"title":"Default Title","offer_id":47905946992801,"sku":"LS7700","price":1375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/6619\/4593\/files\/conmed-linvatec-ls7700-light-source.jpg?v=1790533397"},{"product_id":"stryker-x7000-endoscope-light-source-pn-220-190-000-30-hours-xenon-light-bulb","title":"STRYKER X7000 ENDOSCOPE LIGHT SOURCE, PN 220-190-000 - 30 HOURS XENON LIGHT BULB","description":"\u003cp\u003eThe Stryker X7000 Xenon Endoscope Light Source (P\/N 220-190-000) provides illumination for endoscopic procedures through a compatible fiberoptic light cable. It uses a 300 W elliptical xenon lamp with approximately 30 hours of use; the lamp is rated for approximately 500 hours. The X7000 is compatible with Stryker light cables and can be used in endoscopy setups with Stryker 1088, 1188, and 1288 camera systems.\u003c\/p\u003e\n\n\u003cp\u003eThe light source was tested at our facility for several hours, and all functions were verified by a qualified biomedical technician.\u003c\/p\u003e","brand":"Stryker","offers":[{"title":"Default Title","offer_id":47905947222177,"sku":"X7000","price":675.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/6619\/4593\/files\/stryker-x7000-endoscope-light-source-pn-220-190-000-30-hou.jpg?v=1790533397"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/6619\/4593\/collections\/ChatGPT_Image_Sep_25_2026_06_54_33_AM.png?v=1790308522","url":"https:\/\/chicagomedicalsales.com\/collections\/xenon-light-sources.oembed","provider":"Chicago Medical Sales","version":"1.0","type":"link"}